03-31-2025, 05:40 PM
Portable balancer & Vibration analyzer Balanset-1A
Description:
![[Image: 77-e1693745667801.jpg.webp]](https://vibromera.eu/wp-content/uploads/2023/09/77-e1693745667801.jpg.webp)
Price: €2399
Order on Allegro
Save €100 on vibromera.eu with promo code VB100!
Overview of the Balanset-1A Device
The Balanset-1A is a compact, dual-channel tool created for balancing and vibration analysis of rotating machinery. It excels in balancing rotors such as crushers, fans, mulchers, choppers, shafts, centrifuges, turbines, and more.
Primary Functions and Features
Vibrometer Mode
Tachometer: Precise rotational speed measurement (RPM).
Phase: Accurately determines the phase angle of vibration signals for precise analysis.
1x Vibration: Measurement and analysis of the main frequency component.
FFT Spectrum: Thorough analysis of the vibration signal's frequency spectrum.
Overall Vibration: Monitors overall vibration levels.
Measurement Log: Keeps a record of data for further analysis.
Balancing Function
Single-Plane Balancing: Adjusts rotors in a single plane to reduce vibration.
Two-Plane Balancing: Dynamic rotor balancing in two planes.
Polar Diagram: Displays imbalance on a polar diagram for accurate weight placement.
Last Session Recovery: Allows the previous balancing session to be resumed.
Tolerance Calculator (ISO 1940): Calculates allowable imbalance according to ISO 1940 standards.
Grinding Wheel Balancing: Uses three counterweights to eliminate imbalance.
Charts and Graphs
Overall Graphs: Visualizes total vibration levels.
1x Graphs: Shows the primary frequency vibration characteristics.
Harmonic Graphs: Displays the presence and impact of harmonic frequencies.
Spectral Graphs: Visual representation of the frequency spectrum for thorough analysis.
Additional Functions
Archive: Store and access previous balancing sessions.
Reports: Produce detailed reports on balancing results.
Rebalancing: Enables rebalancing using stored session data.
Serial Production Balancing: Suitable for balancing rotors during serial production.
Included with the Device
Balanset-1A is supplied with:
A measurement unit with interface connectivity.
A pair of vibration sensors.
Optical sensor (laser tachometer) with a magnetic holder.
Electronic balance scales.
Software (Note: Laptop not included, available as an additional order).
Plastic transport case.
Price: €2399
Order on Allegro
Save €100 on vibromera.eu with promo code VB100!
Description:
Price: €2399
Order on Allegro
Save €100 on vibromera.eu with promo code VB100!
Overview of the Balanset-1A Device
The Balanset-1A is a compact, dual-channel tool created for balancing and vibration analysis of rotating machinery. It excels in balancing rotors such as crushers, fans, mulchers, choppers, shafts, centrifuges, turbines, and more.
Primary Functions and Features
Vibrometer Mode
Tachometer: Precise rotational speed measurement (RPM).
Phase: Accurately determines the phase angle of vibration signals for precise analysis.
1x Vibration: Measurement and analysis of the main frequency component.
FFT Spectrum: Thorough analysis of the vibration signal's frequency spectrum.
Overall Vibration: Monitors overall vibration levels.
Measurement Log: Keeps a record of data for further analysis.
Balancing Function
Single-Plane Balancing: Adjusts rotors in a single plane to reduce vibration.
Two-Plane Balancing: Dynamic rotor balancing in two planes.
Polar Diagram: Displays imbalance on a polar diagram for accurate weight placement.
Last Session Recovery: Allows the previous balancing session to be resumed.
Tolerance Calculator (ISO 1940): Calculates allowable imbalance according to ISO 1940 standards.
Grinding Wheel Balancing: Uses three counterweights to eliminate imbalance.
Charts and Graphs
Overall Graphs: Visualizes total vibration levels.
1x Graphs: Shows the primary frequency vibration characteristics.
Harmonic Graphs: Displays the presence and impact of harmonic frequencies.
Spectral Graphs: Visual representation of the frequency spectrum for thorough analysis.
Additional Functions
Archive: Store and access previous balancing sessions.
Reports: Produce detailed reports on balancing results.
Rebalancing: Enables rebalancing using stored session data.
Serial Production Balancing: Suitable for balancing rotors during serial production.
Included with the Device
Balanset-1A is supplied with:
A measurement unit with interface connectivity.
A pair of vibration sensors.
Optical sensor (laser tachometer) with a magnetic holder.
Electronic balance scales.
Software (Note: Laptop not included, available as an additional order).
Plastic transport case.
Price: €2399
Order on Allegro
Save €100 on vibromera.eu with promo code VB100!